COSEL科索PAA300F-3模块电源产品说明书
COSEL科索PAA300F-3模块电源产品说明书
Ordering information Unit type PAA50F PAA PAA 1 50 2 F 3 -5 Recommended Noise Filter NAC-06-472 R -O 4 High voltage pulse noise type : NAP series Low leakage current type : NAM series 5 1Series name 2Output wattage 3Universal input 4Output voltage 5Optional C :with Coating G :Low leakage current J :Connector type N :with Cover R :with Remote ON/OFF *The Noise Filter is recommended *to connect with several devices. MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT PAA50F-3 30 3V 10A PAA50F-5 50 5V 10A PAA50F-12 51.6 12V 4.3A PAA50F-15 52.5 15V 3.5A PAA50F-24 52.8 24V 2.2A PAA50F-48 52.8 48V 1.1A SPECIFICATIONS MODEL VOLTAGE[V] CURRENT[A] INPUT OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY AND NOISE REGULATIONS OTHERS *1 *2 *3 * FREQUENCY[Hz] EFFICIENCY[%] POWER FACTOR ACIN 100V ACIN 200V PAA50F-3 PAA50F-5 PAA50F-12 PAA50F-15 PAA50F-24 AC85 - 264 1f 0.5typ 0.8typ 0.25typ 0.4typ 50/60 (47 - 63) 67typ 74typ 77typ 78typ 80typ 0.95typ (Io=100%) 15typ (Io=100%) 15typ (Io=100%) 0.75max (60Hz, According to UL, CSA, VDE and DEN-AN) 3 5 12 15 24 10 10 4.3 3.5 2.2 20max 20max 48max 60max 96max 40max 40max 100max 120max 150max 80max 80max 120max 120max 120max 140max 140max 160max 160max 160max 120max 120max 150max 150max 150max 160max 160max 180max 180max 180max 50max 50max 120max 150max 240max 60max 60max 150max 180max 290max 20max 20max 48max 60max 96max 500max (ACIN 85V, Io=100%) 10typ (ACIN 85V, Io=100%) 20typ (ACIN 100V, Io=100%) 100typ (ACIN 200V, Io=100%) 2.85 - 3.6 t10% Works over 105% of rating and recovers automatically 4.00 - 5.25V Works at 115 - 140% of rating LED (Green) Optional (Refer to Instruction Manual) AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (At Room Temperature) AC100V 1minute, Cutoff current = 100mA, DC100V 10MW min (At Room Temperature) -10 to +65C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each X, Y and Z axis UL60950-1, EN60950-1, EN50178, CSA C22.2 No.234 Complies with DEN-AN and IEC60950-1 Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B Complies with IEC61000-3-2 37X85X159mm (without terminal block) (WXHXD) /400g max (without cover) ACIN 100V ACIN 100V INRUSH CURRENT[A] ACIN 200V LEAKAGE CURRENT[mA] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] 0 to +50C *1 RIPPLE[mVp-p] -10 - 0C *1 0 to +50C *1 RIPPLE NOISE[mVp-p] -10 - 0C *1 0 to +50C TEMPERATURE REGULATION[mV] -10 to +50C *2 DRIFT[mV] START-UP TIME[ms] HOLD-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OVERCURRENT PROTECTION OVERVOLTAGE PROTECTION OPERATING INDICATION REMOTE ON/OFF *3 INPUT-OUTPUT -RC INPUT-FG *3 OUTPUT-RC-FG *3 OUTPUT-RC OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CONDUCTED NOISE HARMONIC ATTENUATOR CASE SIZE/WEIGHT COOLING METHOD Convection According to 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). Drift is change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Applicable when Remote ON/OFF(optional) is added. Derating is required when operated with case cover. A-48 PAA50F-48 80typ 48 1.1 192max 240max 150max 200max 250max 300max 480max 600max 192max max PAA50F PAA External view CN3 Connector for Remote ON/OFF (option) CN3 Connector for Remote ON/OFF (option) LED 15max Voltage adjust (12) Cover name plate 159 Name plate 1 2 12 Cover(option) CN2 (24) Contents RC(+) 2 RC(-) ( 20 Name plate ( 7.5 4 143 2537 3.5 º4 2-º3.5 Barrier strip type Model B2B-XH-A Mating Connector(Terminal) XHP-2 BXH-001T-P0.6 or SXH-001T-P0.6 11 127-+0.5 3.5 Connector type 1 21.5 171 ¶Weight: 400g or less(without cover) ¶Cover is optional ¶Tolerance + -1 Pin No. 85 38.5 M3 I/O Connector Mating Connector Terminal CN1 5289-4A 5199-04 Chain: 5194PBT Loose: 5194PBTL CN2 5277-4A 5196-04 Chain: 5194PBT Loose: 5194PBTL ¶Maximum 5A per pin of CN2 can be applied. (Mfr : Molex) CN3 Option (Mfr : J.S.T.) 100-+0.5 159 Terminal cover (15) 3.5 FG AC(L) NC AC(N) 18.5 CN1 2-M3 Mounting hole (71) (65) (13.5) 7.5 9.5 + FG AC(L) AC(N) - 8.5 + 3-M3 Mounting hole ¶Mounting torque:0.49N.m(5.0kgf.cm)max Performance data ¡RISE TIME & FALL TIME (PAA50F-5 ) ¡EFFICIENCY (PAA50F-5) 84 80 76 EFFICIENCY 72 DC Output ACIN 100V Io=100% AC Input 68 64 60 56 Load factor 100% Load factor 50% 52 0 50ms/DIV 100 140 180 220 INPUT VOLTAGE ¡HARMOINC CURRENT (PAA50F-5) 10 Load factor 100% Input voltage AC 230V A A 100% Load factor Input voltage AC 100V 1 HARMONIC CURRENT 1 HARMONIC CURRENT 300 ¡HARMONIC CURRENT (PAA50F-5) 10 Harmonic current standard class D (at odd number) 0.1 0.01 0.001 0 260 V 10 20 HARMONIC ORDER 30 40 Harmonic current standard class D (at odd number) 0.1 0.01 0.001 0 10 20 30 40 HARMONIC ORDER A-49 Ordering information Unit type PAA75F PAA PAA 1 75 2 F 3 -5 Recommended Noise Filter NAC-06-472 R -O 4 High voltage pulse noise type : NAP series Low leakage current type : NAM series 5 1Series name 2Output wattage 3Universal input 4Output voltage 5Optional C :with Coating G :Low leakage current J :Connector type N :with Cover R :with Remote ON/OFF *The Noise Filter is recommended *to connect with several devices. MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT PAA75F-3 45 3V 15A PAA75F-5 75 5V 15A PAA75F-12 75.6 12V 6.3A PAA75F-15 75 15V 5A PAA75F-24 76.8 24V 3.2A PAA75F-48 76.8 48V 1.6A SPECIFICATIONS MODEL VOLTAGE[V] CURRENT[A] INPUT OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY AND NOISE REGULATIONS OTHERS *1 *2 *3 * FREQUENCY[Hz] EFFICIENCY[%] POWER FACTOR ACIN 100V ACIN 200V PAA75F-3 PAA75F-5 PAA75F-12 PAA75F-15 PAA75F-24 AC85 - 264 1f 0.7typ 1.2typ 0.35typ 0.6typ 50/60 (47 - 63) 67typ 74typ 77typ 78typ 80typ 0.95typ (Io=100%) 15typ (Io=100%) 15typ (Io=100%) 0.75max (60Hz, According to UL, CSA, VDE and DEN-AN) 3 5 12 15 24 15 15 6.3 5 3.2 20max 20max 48max 60max 96max 40max 40max 100max 120max 150max 80max 80max 120max 120max 120max 140max 140max 160max 160max 160max 120max 120max 150max 150max 150max 160max 160max 180max 180max 180max 50max 50max 120max 150max 240max 60max 60max 150max 180max 290max 20max 20max 48max 60max 96max 500max (ACIN 85V, Io=100%) 10typ (ACIN 85V, Io=100%) 20typ (ACIN 100V, Io=100%) 100typ (ACIN 200V, Io=100%) 2.85 - 3.6 t10% Works over 105% of rating and recovers automatically 4.00 - 5.25V Works at 115 - 140% of rating LED (Green) Optional (Refer to Instruction Manual) AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (At Room Temperature) AC100V 1minute, Cutoff current = 100mA, DC100V 10MW min (At Room Temperature) -10 to +65C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each X, Y and Z axis UL60950-1, EN60950-1, EN50178, CSA C22.2 No.234 Complies with DEN-AN and IEC60950-1 Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B Complies with IEC61000-3-2 42X93X175mm (without terminal block) (WXHXD) /550g max (without cover) ACIN 100V ACIN 100V INRUSH CURRENT[A] ACIN 200V LEAKAGE CURRENT[mA] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] 0 to +50C *1 RIPPLE[mVp-p] -10 - 0C *1 0 to +50C *1 RIPPLE NOISE[mVp-p] -10 - 0C *1 0 to +50C TEMPERATURE REGULATION[mV] -10 to +50C *2 DRIFT[mV] START-UP TIME[ms] HOLD-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OVERCURRENT PROTECTION OVERVOLTAGE PROTECTION OPERATING INDICATION REMOTE ON/OFF *3 INPUT-OUTPUT -RC INPUT-FG *3 OUTPUT-RC-FG *3 OUTPUT-RC OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CONDUCTED NOISE HARMONIC ATTENUATOR CASE SIZE/WEIGHT COOLING METHOD Convection According to 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). Drift is change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Applicable when Remote ON/OFF(optional) is added. Derating is required when operated with case cover. A-50 PAA75F-48 80typ 48 1.6 192max 240max 150max 200max 250max 300max 480max 600max 192max max PAA75F PAA External view CN3 Connector for Remote ON/OFF(option) CN3 Connector for Remote ON/OFF(option) LED 175 (12) Voltage adjust Name plate Cover name plate 1 2 12 Cover(option) CN2 FG AC(L) NC AC(N) 45 CN1 2-M3 Mounting hole (78) (71) (13.5) 7.5 9.5 + FG AC(L) AC(N) + 125-+0.5 175 Terminal cover (15) (24) 93 15max M3 20 187 Pin No. Contents 1 RC(+) 2 RC(-) ( ( 3.5 20 Name plate 2-º3.5 7.5 5 159 3042 Barrier strip type Model B2B-XH-A Mating Connector(Terminal) XHP-2 BXH-001T-P0.6 or SXH-001T-P0.6 21 Connector type CN3 Option (Mfr : J.S.T.) º4 11 ¶Weight: 500g or less(without cover) ¶Cover is optional ¶Tolerance+ -1 35 125-+0.5 3.5 3.5 I/O Connector Mating Connector Terminal CN1 5289-4A 5199-04 Chain: 5194PBT Loose: 5194PBTL CN2 5277-6A 5196-06 Chain: 5194PBT Loose: 5194PBTL ¶Maximum 5A per pin of CN2 can be applied. (Mfr : Molex) 3-M3 Mounting hole ¶Mounting torque:0.49N.m(5.0kgf.cm)max Performance data ¡RISE TIME & FALL TIME (PAA75F-5 ) ¡EFFICIENCY (PAA75F-5) 84 80 76 EFFICIENCY 72 DC Output ACIN 100V Io=100% AC Input 68 64 60 56 Load factor 100% Load factor 50% 52 0 50ms/DIV 100 140 180 INPUT VOLTAGE ¡HARMOINC CURRENT (PAA75F-5) HARMONIC CURRENT Harmonic current standard class D (at odd number) 0.1 0.01 10 20 HARMONIC ORDER 30 100% Load factor Input voltage AC 230V A A HARMONIC CURRENT 300 10 100% Load factor Input voltage AC 100V 0.001 0 260 ¡HARMONIC CURRENT (PAA75F-5) 10 1 220 V 40 1 Harmonic current standard class D (at odd number) 0.1 0.01 0.001 0 10 20 30 40 HARMONIC ORDER A-51 Ordering information Unit type PAA100F PAA PAA 100 1 2 F 3 -5 Recommended Noise Filter NAC-06-472 R -O 4 High voltage pulse noise type : NAP series Low leakage current type : NAM series 5 1Series name 2Output wattage 3Universal input 4Output voltage 5Optional C :with Coating G :Low leakage current N :with Cover R :with Remote ON/OFF *The Noise Filter is recommended *to connect with several devices. MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT PAA100F-3 60 3V 20A PAA100F-5 100 5V 20A PAA100F-12 102 12V 8.5A PAA100F-15 105 15V 7A PAA100F-24 108 24V 4.5A PAA100F-48 100.8 48V 2.1A PAA100F-12 PAA100F-15 PAA100F-24 PAA100F-48 79typ 79typ 24 4.5 96max 150max 120max 160max 150max 180max 240max 290max 96max 48 2.1 192max 240max 150max 200max 400max 600max 480max 600max 192max SPECIFICATIONS MODEL VOLTAGE[V] CURRENT[A] INPUT OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY AND NOISE REGULATIONS OTHERS *1 *2 *3 * FREQUENCY[Hz] EFFICIENCY[%] PAA100F-3 PAA100F-5 AC85 - 264 1f or DC120 - 340 ACIN 100V 0.9typ 1.4typ ACIN 200V 0.45typ 0.7typ 50/60 (47 - 63) ACIN 100V POWER FACTOR ACIN 200V ACIN 100V INRUSH CURRENT[A] ACIN 200V LEAKAGE CURRENT[mA] VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] 0 to +50C *1 RIPPLE[mVp-p] -10 - 0C *1 0 to +50C *1 RIPPLE NOISE[mVp-p] -10 - 0C *1 0 to +50C TEMPERATURE REGULATION[mV] -10 to +50C *2 DRIFT[mV] START-UP TIME[ms] HOLD-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] OVERCURRENT PROTECTION OVERVOLTAGE PROTECTION OPERATING INDICATION REMOTE SENSING REMOTE ON/OFF *3 INPUT-OUTPUT -RC INPUT-FG *3 OUTPUT-RC-FG *3 OUTPUT-RC OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CONDUCTED NOISE HARMONIC ATTENUATOR CASE SIZE/WEIGHT COOLING METHOD 65typ 74typ 76typ 77typ 0.99typ (Io=100%) 0.95typ (Io=100%) 20typ (Io=100%) (At cold start) 40typ (Io=100%) (At cold start) 0.75max (60Hz, According to UL, CSA, VDE and DEN-AN) 3 5 12 15 20 20 8.5 7 20max 20max 48max 60max 40max 40max 100max 120max 80max 80max 120max 120max 140max 140max 160max 160max 120max 120max 150max 150max 160max 160max 180max 180max 50max 50max 120max 150max 60max 60max 150max 180max 20max 20max 48max 60max 500max (ACIN 85V, Io=100%) 20typ (Io=100%) 2.85 - 3.6 t10% Works over 105% of rating and recovers automatically 4.00 - 5.25V Works at 115 - 140% of rating LED (Green) Provided Optional (Refer to Instruction Manual) AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (At Room Temperature) AC100V 1minute, Cutoff current = 100mA, DC100V 10MW min (At Room Temperature) -10 to +65C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each X, Y and Z axis UL60950-1, EN60950-1, EN50178, CSA C22.2 No.234 Complies with DEN-AN and IEC60950-1 Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B Complies with IEC61000-3-2 50X93X189mm (without terminal block) (WXHXD) /700g max (without cover) Convection According to 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101). Drift is change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. Applicable when Remote ON/OFF(optional) is added. Derating is required when operated with cover. A-52 PAA100F PAA External view Voltage adjust LED Short piece (13.5) 20max Cover name plate CN1(option) 189 1 2 Cover (option) 10 2-M4 Mounting hole 8.2 +V (81) -V 93 +S -S 45 FG AC(L) (11.5) AC(N) M4 (16) (28) Terminal cover 125-+0.5 20 º4.5 100-+0.5 74 4.5 Contents +RC -RC 10 37.5 Mating Connector(Terminal) Mfr: J.S.T. XHP-2(BXH-001T-P0.6 or SXH-001T-P0.6) 22.5 Pin No. 1 2 3-M4 Mounting hole 25-+0.5 50